Parametric Track Generator for RC Tanks and Robotics

General

Engagement Style Pitch

Engagement

Inner-side drivetrain geometry for sprocket engagement.

Engagement Layout

Tooth Slot Width

Tooth Slot Length

Engagement Depth

Engagement Clearance

Sinusoidal Amplitude

Sinusoidal Period

Sinusoidal Roundness

Pocket Mode

Pocket Depth

Link Geometry

Track Width Link Side Clearance Link Length Link Thickness

Guide Horns

Raised alignment features on the inner/drivetrain face.

Enable Guide Horns

Horn Layout

Horn Height

Horn Width

Horn Length Ratio

Horn Taper

Hinge System

Cylindrical through-holes with external pins or rods. No fused, living, or snap-flex hinges in V1.

Pin Diameter Pin Tolerance Hinge Lug Width Hinge Lug Gap Hinge Wall Thickness

Tread Style

Raised traction geometry on the outer/ground-facing side.

Tread Style

Tread Height

Tread Spacing

Tread Width Ratio

Feature Length Scale

Feature Width Scale

Tread Edge Margin

Tread Taper

Footprint Lateral Offset

Preview

Preview Mode

Articulation Angle

Engagement Style Pin-gap compatible

Engagement Dual side

Preview Single link

Pin Hole Diameter 3.4 mm

Guide Horns Single center

Ready to generate a printable rigid track link STL.